Shafting

(TGP) Turned, Ground and Polished Shafting

  • Bearing quality shaft
  • To ensure safe shipment, bars are prepared and crated in wood boxes with cardboard tubing.
  • To remove residual internal stresses, all bars are delivered machine straightened and stress relieved.
  • Readily machinable upon delivery.
  • Withstand vibration and shock to yield long life.
  • Precision turned, ground & polished to very tight diameter and straightness tolerances.

 

Metric Chrome Plated & TGP Shaft

 

  • Bearing quality shaft
  • To ensure safe shipment, bars are prepared and crated in wood boxes with cardboard tubing.
  • To remove residual internal stresses, all bars are delivered machine straightened and stress relieved.
  • Readily machinable upon delivery.
  • Withstand vibration and shock to yield long life.
  • Precision turned, ground & polished to very tight diameter and straightness tolerances.
  • To supply the corrosion resistance necessary for all Rod application, hardness, toughness and close tolerances are combined with chromium plating.
  • Corrosive resistance shafting for piston rod and hydraulic piston applications
  • Metric diameter hard chromium plated turned, ground and polished shaft

CARBON STEEL

  • 1045 TGP – Turned, Ground, Polished Shafting
    • Stocked in a wide variety of sizes
    • 75 KSI Min Yield
    • Most sizes in stock for immediate shipment
    • Can be cut for UPS if necessary
  • 1050 HIGH YEILD TGP – Turned, Ground, Polished Shafting
    • 100 KSI Min Yield

ALLOY STEEL

  • 4140 Q&T Turned, Ground, Polished SHAFTING (WINCO TGP)
    • Quench & Tempered, Stress Relieved Through Hardened Alloy steel shaft with excellent mechanical properties.
    • See WINCO TGP Product Sheet
  • 1141 TGP – Turned, Ground, Polished SHAFTING
    • 1141 is a medium-carbon steel with higher mechanical properties than other medium carbon steels, as well as free machining properties.
    • Because of the free machining properties, it is usuallly used in automatic screw machines. Applications: pins, studs, bolts, axles and various machine parts needing considerable machining, close finish tolerances, bright finish, and high mechanical properties.
    • Machinability rating is 70% of AISI 1212 steel
  • 1144 (Stressproof-equivalent) TGP – Turned, Ground, Polished SHAFTING
    • 1144 is a medium-carbon steel with higher mechanical properties than other medium carbon steels, as well as free machining properties.
    • Very low distortion or warpage after machining due to a combination of its chemistry, method of manufacture, and heat treatment.
    • Relatively easy to machine, with a machinability rating of 83% of AISI 1212 steel

STAINLESS STEEL

  • 303
    • 303 is one of the most popular of all the free machining stainless steels. It offers good strength, corrosion resistance and great machinability.
  • 304
    • One of the most widely used and oldest of the stainless steels. This was originally called 18-8 which stood for its chromium and nickel content. It possesses an excellent combination of strength, corrosion resistance and fabricability.
  • 316
    • This austenitic stainless steel has an increased molybdenum content to increase its resistance to corrosion when compared to other 300 series alloys. It will resist scaling at temperatures up to 1600 F. Many of our customer use this material for heat treating applications where hot salt solution is used. 316 is also used in the marine industry because of its resistance to corrosion.
    • Improved resistance to pitting corrosion in chloride environments
  • 17-4 H1150
    • Withstands corrosive attack better than any of the standard hardenable stainless steels
    • Heat Treated for increased mechanical properties and hardness.