WINCO-TUF 36
Hi Strength Wear Plate. Quenched and Tempered for Extreme Abrasion and Impact.
WINCO-TUF 36 has excellent toughness at high hardness and in heavy sections. For severe impact and abrasion.
Advantages
- Maximum resistance to abrasion and impact.
- Withstands the brittleness which develops at subnormal temperatures.
- Increased toughness and fatigue resistance.
- Retains high strength and wearability at high temperatures.
- High impact and wear properties retained at weld joints.
Physical Properties
Tensile Strength — 200,000 PSI
Yield Strength — 160,000 PSI
Elongation in 2″ — 14.4%
Reduction of Area — 55%
Hardness — 36-44 Rockwell “C”
Brinell — Min. 360
Typical Analysis
Carbon — .17/.25
Chromium — .45/.60
Manganese — 1.35/1.85
Nickel — .40/.70
Silicon — .35/.45
Copper — .60/.75
Molybdenum — .35/.45
Phosphorus — .025 max.
Sulphur — .025 max.
WINCO-TUF 40
Superior to standard AR400. Hi Strength Wear Plate. Quenched and Tempered for Extreme Abrasion and Moderate Impact
WINCO-TUF 40 has excellent toughness at high hardness and in heavy sections. For severe abrasion…and superior to standard AR400. Winco-Tuf 40 is for use in areas where AR400/AR500 are currently used.
Advantages
- Maximum resistance to abrasion and impact.
- Withstands the brittleness which develops at subnormal temperatures.
- Increased toughness and fatigue resistance compared to low carbon and 1045 plate.
- Retains high strength and wearability at high temperatures.
- High impact and wear properties retained at weld joints.
Physical Properties
Tensile Strength — 200,000 PSI
Yield Strength — 160,000 PSI
Elongation in 2″ — 14.4%
Reduction of Area — 55%
Hardness — 40-46 Rockwell “C”
Brinell — Min. 375-440
Typical Analysis
Carbon — .17/.25
Chromium — .45/.60
Manganese — 1.50
Nickel — .70/1.00
Silicon — .50
Copper — .15/.30
Molybdenum — .20/.60
Phosphorus — .025 max.
Sulphur — .015 max.
WINCO-TUF 50
Superior to standard AR500. Ultra Hi Strength Alloy Wear Plate.
WINCO-TUF 50 Quenched and Tempered, High Alloy Steel Is Intended Specifically for Applications Requiring a High Degree of Abrasion and Wear Resistance.
Used by industries such as mining, forestry, quarrying, and construction. WINCO-TUF 50 is the cost-effective choice for parts subjected to extremely high levels of wear. Winco-Tuf 50 if superior to standard AR500 plate. Winco-Tuf 40 is for use in areas where AR400/AR500 are currently used.
Physical Properties
Tensile Strength — 210,000 PSI
Yield Strength — 180,000 PSI
Elongation in 2″ — 12%
Hardness — 48-53 Rockwell “C”
Brinell Hardness — 455-525 BHN
Typical Analysis
Carbon — .31
Chromium — 1.00
Manganese — 1.50
Nickel — .70
Silicon — .55
Boron — .003
Molybdenum — .35
Phosphorus — .025
Sulphur — .015
Welding Instructions
WINCO-TUF 50 has superior welding characteristics. No specific electrodes are needed — standard low-hydrogen, high-tensile rod is recommended for maximum strength. E100XX, E110XX or E120XX or E130XX is preferred.